GUNSMITHING
LARRY WENGLER, HEAD GUNSMITH
BILL KELLER, GUNSMITH
AND KNIFE MAKER
AND KNIFE MAKER
GARY TRIAL, GUNSMITH AND
STOCK CARVING
STOCK CARVING
MIKE FALCON, PISTOL SMITH
Gunsmithing Prices
***** Labor Only Except Where Noted ****
Estimates
If The Customer Wants An Estimate:
1. Estimates will be given only on jobs totaling over $75.
2. Customer must set a limit if they do not want to spend over $75
3. Prepare Proposal of Damage for insurance purposes - $ 35.00 @
Service Charges
Per Man Hour ------------------------------------------- $ 95.00
Per Man & Machine Hour ------------------------------- $145.00
Minimum Shop Charge ---------------------------------- $ 35.00
Clean & Lubricate
Shotguns, Rifles & Handguns ----------------------------- $ 60.00
Note: Any Gun With Excessive Rust -------------------- P.O.R.
Scope & Sight Work
Bore-sight ----------------------------------------------- $ 10.00
Sight in firearm at Range (not including ammunition) ------ $ 125.00
Mount scope on rifle or handgun already drilled & tapped - $ 40.00
Drill & tap most rifles & handguns for scope -------------- $ 95.00
Recoil Pads
Labor to install recoil pads ------------------------------- $ 60.00
High Grade guns ----------------------------------------- $ 75.00
Shorten stock & re-install old pad ------------------------ $ 70.00
Extra labor to install ?? spacers ------------------------ $ 15.00 @
***** Labor Only Except Where Noted ****
Estimates
If The Customer Wants An Estimate:
1. Estimates will be given only on jobs totaling over $75.
2. Customer must set a limit if they do not want to spend over $75
3. Prepare Proposal of Damage for insurance purposes - $ 35.00 @
Service Charges
Per Man Hour ------------------------------------------- $ 95.00
Per Man & Machine Hour ------------------------------- $145.00
Minimum Shop Charge ---------------------------------- $ 35.00
Clean & Lubricate
Shotguns, Rifles & Handguns ----------------------------- $ 60.00
Note: Any Gun With Excessive Rust -------------------- P.O.R.
Scope & Sight Work
Bore-sight ----------------------------------------------- $ 10.00
Sight in firearm at Range (not including ammunition) ------ $ 125.00
Mount scope on rifle or handgun already drilled & tapped - $ 40.00
Drill & tap most rifles & handguns for scope -------------- $ 95.00
Recoil Pads
Labor to install recoil pads ------------------------------- $ 60.00
High Grade guns ----------------------------------------- $ 75.00
Shorten stock & re-install old pad ------------------------ $ 70.00
Extra labor to install ?? spacers ------------------------ $ 15.00 @
Rifle Barrel Work
Muzzle Brakes - Vias Quiet brake [includes parts & labor] - $250.00
Other Barrel Work
Re-barrel using customer supplied barrel --------------- $500.00
Re-barrel with Douglas premium grade with standard contour - $675.00
[includes barrel] For stainless add -------- $150.00
Note: Above includes bluing barrel or bead blasting on Stainless.
Price does not include bluing action, bedding, or Sight work.
Re-chamber barrel for larger cartridge ------------------- $200.00
Muzzle Brakes - Vias Quiet brake [includes parts & labor] - $250.00
Other Barrel Work
Re-barrel using customer supplied barrel --------------- $500.00
Re-barrel with Douglas premium grade with standard contour - $675.00
[includes barrel] For stainless add -------- $150.00
Note: Above includes bluing barrel or bead blasting on Stainless.
Price does not include bluing action, bedding, or Sight work.
Re-chamber barrel for larger cartridge ------------------- $200.00
| COPYRIGHT © 2011 NAGEL’S GUN SHOP ALL MANUFACTURER’S PRODUCT NAMES AND LOGOS ARE TRADEMARKS OR REGISTERED TRADEMARKS OF THEIR RESPECTIVE OWNERS |
Check headspace ---------------------------------------- $ 40.00
Remove stuck case from barrel --------------------------- $ 85.00
Remove live round from chamber ---------------------- $100.00 up
Remove AR15 style Barrel Nut ------------------------- $100.00
Make chamber cast [to determine caliber or case dimensions] - $ 60.00
Note: we keep cast
Cut & crown barrel [does not include reinstallation of sight] - $100.00
Cut & crown barrel where necessary to remove from action - $150.00
Thread barrel for suppressor or muzzle brake ------------ $175.00
Rifle Work
Action Work
Alter bolt handle to clear scope ------------------------- $150.00
Install Buehler safety, labor ------------------------------ $ 65.00
Trigger Work
Adjustable triggers [not to be reduced below 3 pounds] --$ 60.00
Non-adjustable triggers [lever actions, military, Ruger 77 MKII - $ 75.00 up
Semi-autos [where possible] ---------------------------- $100.00 up
Rifle Stock Work
Install sling swivels --------------------------------------- $ 40.00
Float barrel ---------------------------------------------- $ 65.00
Glass bed action & float barrel -------------------------- $150.00
Pillar bed & float ---------------------------------------- $175.00
Fit pre-finished fiberglass stock & pillar bed ------------- $300.00
Inlet semi-inletted stock [glass bedding extra] ------------ $250.00
Inlet shape & finish semi-inletted stock ---------------- $500.00 up
Blueing
Handguns & long guns, matte finish ------------------- $175.00 up
Polished ---------------------------------------------- $300.00 up
Baked-On Polymer Coating -------------------------- $300.00
AR 15 -------------------------------- $350.00
Colors available: Black, Brown, Tan, OD Green, Mil Spec Green, Gray,
Stainless Steel, White, Red, Pink
Shotgun Work
Sights
Drill & tap for front or center bead (labor only) --------- $ 45.00
Install bead in existing hole with correct threads ----------$ 35.00
Barrel Work
Open choke, per barrel --------------------------------- $ 85.00
Ream & thread barrel for Nu-Line screw-in chokes ---- $269.00
(includes 3 chokes)
Nu-Line choke tubes [each] ---------------------------- $ 37.50
Shorten barrel at time of screw-in choke installation ----- $ 40.00
Labor to install Cutts Comp or Lyman choke ----------- $100.00
Re-chamber for longer shells (each barrel) -------------- $ 85.00
Lengthen forcing cone ---------------------------------- $ 85.00
Re-chamber or forcing cone job on chrome lined barrel - $125.00
Cut & re-crown single barrel shotgun & re-install sight -- $ 75.00
Cut & re-crown double barrel shotguns, fill in between barrels
with solder & re-install sight -------------------- $125.00
Porting single barrel shotguns [in our shop] -------------- $150.00
Porting over/under shotguns [in our shop] --------------- $250.00
Straighten barrel [at cutomer's risk] ------------------- $ 85.00 up
Remove dents [at customer's risk] -------------------- $100.00 up
Re-attach loose ribs Win 101, Browning O/U and Daly O/U - $200.00 up
Note: Some discoloration of the bluing around the rib is likely.
Above price does not include re-bluing.
Stock Work
Raise comb by bending tang and re-inletting Rem 1100, 870, & Win 12
- $ 85.00
Raise comb by bending wood where possible --------- $200.00 up
Adjust comb labor ------------------------------------ $285.00
Hardware for adjustable comb ---------------- $100.00
Refinishing
Oil finish --------------------------------------------- $250.00 up
Note: for stocks with checkering add ----------------- $100.00
Recoil Pads
Labor to install recoil pads ----------------------------- $ 60.00
Shorten stock & re-install old pad ---------------------- $ 75.00
Extra labor to install ?? spacers ----------------------- $ 15.00 @
Install Adjustable butt plate [Timney] ------------------ $250.00
Hardware for adjustable butt with pitch adjustment ----- $150.00
Install Jones stock adjuster ----------------------------- $100.00
[Above does not include pad or pad labor]
Handgun Work
Revolver Work
Revolver triggers [single action only] -------------------- $100.00
Revolver triggers [single action & double action pull] ---- $185.00
Chamfer breech of barrel [forcing cone] ----------------- $ 95.00
Straighten crane ---------------------------------------- $100.00
Stretch crane to remove end play on S&W ------------- $100.00
Re-time revolver, labor only -------------------------- $100.00 up
Shorten barrel & re-install sight where possible -------- $275.00
Front sight insert -------------------------------------- $ 50.00
1911 Type Semi-Autos
Trigger job --------------------------------------------- $150.00
Throat [polish feed ramp on barrel and frame] ---------- $ 85.00
Install beavertail safety [labor only] --------------------- $165.00
Lower ejection port ------------------------------------ $125.00
Tighten slide ------------------------------------------- $175.00
Fit match barrel --------------------------------------- $175.00
Fit standard barrel ----------------------------------- $100.00 up
Fit bushing ------------------------------------------- $100.00
Fit new trigger ---------------------------------------- $ 75.00
Fit new hammer -------------------------------------- $125.00
Fit grip safety --------------------------------------- $125.00 up
Remove stuck case from barrel --------------------------- $ 85.00
Remove live round from chamber ---------------------- $100.00 up
Remove AR15 style Barrel Nut ------------------------- $100.00
Make chamber cast [to determine caliber or case dimensions] - $ 60.00
Note: we keep cast
Cut & crown barrel [does not include reinstallation of sight] - $100.00
Cut & crown barrel where necessary to remove from action - $150.00
Thread barrel for suppressor or muzzle brake ------------ $175.00
Rifle Work
Action Work
Alter bolt handle to clear scope ------------------------- $150.00
Install Buehler safety, labor ------------------------------ $ 65.00
Trigger Work
Adjustable triggers [not to be reduced below 3 pounds] --$ 60.00
Non-adjustable triggers [lever actions, military, Ruger 77 MKII - $ 75.00 up
Semi-autos [where possible] ---------------------------- $100.00 up
Rifle Stock Work
Install sling swivels --------------------------------------- $ 40.00
Float barrel ---------------------------------------------- $ 65.00
Glass bed action & float barrel -------------------------- $150.00
Pillar bed & float ---------------------------------------- $175.00
Fit pre-finished fiberglass stock & pillar bed ------------- $300.00
Inlet semi-inletted stock [glass bedding extra] ------------ $250.00
Inlet shape & finish semi-inletted stock ---------------- $500.00 up
Blueing
Handguns & long guns, matte finish ------------------- $175.00 up
Polished ---------------------------------------------- $300.00 up
Baked-On Polymer Coating -------------------------- $300.00
AR 15 -------------------------------- $350.00
Colors available: Black, Brown, Tan, OD Green, Mil Spec Green, Gray,
Stainless Steel, White, Red, Pink
Shotgun Work
Sights
Drill & tap for front or center bead (labor only) --------- $ 45.00
Install bead in existing hole with correct threads ----------$ 35.00
Barrel Work
Open choke, per barrel --------------------------------- $ 85.00
Ream & thread barrel for Nu-Line screw-in chokes ---- $269.00
(includes 3 chokes)
Nu-Line choke tubes [each] ---------------------------- $ 37.50
Shorten barrel at time of screw-in choke installation ----- $ 40.00
Labor to install Cutts Comp or Lyman choke ----------- $100.00
Re-chamber for longer shells (each barrel) -------------- $ 85.00
Lengthen forcing cone ---------------------------------- $ 85.00
Re-chamber or forcing cone job on chrome lined barrel - $125.00
Cut & re-crown single barrel shotgun & re-install sight -- $ 75.00
Cut & re-crown double barrel shotguns, fill in between barrels
with solder & re-install sight -------------------- $125.00
Porting single barrel shotguns [in our shop] -------------- $150.00
Porting over/under shotguns [in our shop] --------------- $250.00
Straighten barrel [at cutomer's risk] ------------------- $ 85.00 up
Remove dents [at customer's risk] -------------------- $100.00 up
Re-attach loose ribs Win 101, Browning O/U and Daly O/U - $200.00 up
Note: Some discoloration of the bluing around the rib is likely.
Above price does not include re-bluing.
Stock Work
Raise comb by bending tang and re-inletting Rem 1100, 870, & Win 12
- $ 85.00
Raise comb by bending wood where possible --------- $200.00 up
Adjust comb labor ------------------------------------ $285.00
Hardware for adjustable comb ---------------- $100.00
Refinishing
Oil finish --------------------------------------------- $250.00 up
Note: for stocks with checkering add ----------------- $100.00
Recoil Pads
Labor to install recoil pads ----------------------------- $ 60.00
Shorten stock & re-install old pad ---------------------- $ 75.00
Extra labor to install ?? spacers ----------------------- $ 15.00 @
Install Adjustable butt plate [Timney] ------------------ $250.00
Hardware for adjustable butt with pitch adjustment ----- $150.00
Install Jones stock adjuster ----------------------------- $100.00
[Above does not include pad or pad labor]
Handgun Work
Revolver Work
Revolver triggers [single action only] -------------------- $100.00
Revolver triggers [single action & double action pull] ---- $185.00
Chamfer breech of barrel [forcing cone] ----------------- $ 95.00
Straighten crane ---------------------------------------- $100.00
Stretch crane to remove end play on S&W ------------- $100.00
Re-time revolver, labor only -------------------------- $100.00 up
Shorten barrel & re-install sight where possible -------- $275.00
Front sight insert -------------------------------------- $ 50.00
1911 Type Semi-Autos
Trigger job --------------------------------------------- $150.00
Throat [polish feed ramp on barrel and frame] ---------- $ 85.00
Install beavertail safety [labor only] --------------------- $165.00
Lower ejection port ------------------------------------ $125.00
Tighten slide ------------------------------------------- $175.00
Fit match barrel --------------------------------------- $175.00
Fit standard barrel ----------------------------------- $100.00 up
Fit bushing ------------------------------------------- $100.00
Fit new trigger ---------------------------------------- $ 75.00
Fit new hammer -------------------------------------- $125.00
Fit grip safety --------------------------------------- $125.00 up